Raspberry Pi-sized LattePanda Alpha runs Windows 10, offers MacBook-like specs
Launching today, the LattePanda Alpha uses the same class of Intel processor as found in the $1,200 12-inch MacBook, a 7th generation Intel Core m3.
The new LattePanda Alpha single-board computer may be similar in size to the tiny Raspberry Pibut its specs are to closer to an Apple MacBook.
Launching today, the LattePanda Alpha is not a Pi competitor, as while the Pi 3 B+ costs just $35, the LattePanda Alpha starts at $358.
That extra cash pays for specs more akin to those found on a laptop than on a low-cost board like the Pi.
The LattePanda Alpha uses the same class of Intel processor as found in the $1,200 12-inch MacBook.
Backing up this 7th-generation Intel Core m3 processor is 8GB of DDR3 memory and 64GB of fast eMMC v5.0 Flash storage, alongside Gigabit Ethernet, 802.11ac Wi-Fi, USB 3.0 ports, a USB Type-C port, 4K video out and dual M.2 connectors that could be used for hooking up fast NVMe SSD storage.
The board is available with Windows 10 Pro, which pushes the price up to $398, as well as being compatible with a broad range of Linux-based operating systems due to its x86 CPU. The board—which is about 70% the length of the iPhone 7 Plus—is designed to be used to be used by developers building a wide range of hardware and software, from robotics to Internet of Thingsand edge-computing appliances. The Alpha has 2 x 50-pin headers for hooking up hardware, as well as an Arduino Leonardo co-processor.
The LattePanda Alpha was funded by a Kickstarter campaign last year, which exceeded its initial goal of $100,000 by over 800 percent.
It is not the first Windows 10-based developer board released by DFRobot, with an earlier machine selling for around $120. That initial board was again higher specced and priced than the Pi, but some reviewers also reported that the board overheated without additional cooling, resulting in the processor being throttled to a slower speed.
However, early reviews of the Alpha have been positive, with this reviewer finding Windows 10 to be fast and responsive on the board, and claiming even video editing worked “very well”, but “not perfectly”, on the computer.
The question facing developers and tech hobbyists looking for boards for home projects is whether a $300+ board is overkill when the Pi 3 B+ is available for one tenth the price and there are already some pretty capable boards for under $100.
- CPU：Intel 7th Gen Core m3-7y30
- Core：1.6-2.6GHz Dual-Core，Four-Thread
- Graphics：Intel HD Graphics 615, 300-900MHz
- RAM：8GB LPDDR3 1866MHz Dual-Channel
- Connectors: 1x M.2 M Key, PCIe 4x, supports NVMe SSD and SATA SSD. 1x M.2 E Key, PCIe 2x，supports USB2.0, UART, PCM
- Connectivity： WIFI 802.11 AC, 2.4G & 5G Dual Band. Bluetooth 4.2. Gigabyte Ethernet
- USB Ports： 3x USB 3.0 Type A. 1x USB Type C, supports PD, DP, USB 3.0
- Display： HDMI Output Type-C DP Support Extendable eDP touch displays
- Co-processor：Arduino Leonardo
- GPIO & other features：2x 50 GPIOs including I2C, I2S, USB, RS232, UART, RTC. Power Management. Extendable power button.
- OS Support：Windows 10 Pro, various Linux